Tork Craft Polishing And Compound Kit

Tork Craft Polishing And Compound Kit Product Description

Polishing and compound kit Application

The kit includes a polishing buff and 5 solid polishing compounds. The
compounds are used with various metals. It can be used to remove stretcher
strains, orange peel, polishing wheel grit lines and light die marks etc.

TIP
Spare polishing compound is available for the kit
TC804904

How to use the compounds and the buffing pad

The adaptor is used to hold the buffing pad in the drill's chuck. Fasten the correct buffing pad in the adaptor./li>

It would be best to use a drill press to polish metals. If a drill press
is not accessable, use adaptor
TCV01810 with a portable drill with a collar
diameter of 43mm. Tighten the adaptor in the drill's chuck.

The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occuring.

If desired, heat the item to 65 C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.

Hold the metal lightly against the buffing pad. Allow the compound to do
the work.

If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.