Tork Craft Cleaning & Polishing Kit - Soft Metals C/W 12.5mm Arbor

Tork Craft Cleaning & Polishing Kit - Soft Metals C/W 12.5mm Arbor Product Description

Cleaning Polishing kit

Polishing
kit Soft metals

Included in the set

• x1 12.5mm arbor chuck adaptor
• x1 3 regular cleaning compound
• x1 5 light polishing compound
• x1 6 high gloss polishing compound
• x2 100mm medium buffing pad
• x1 100mm firm buffing pad

Application

This is a complete kit to remove scratches, clean and polish soft metals

• Brass
• Copper
• Tin
• Pewter
• Aluminium

How to use the compounds and the buffing pads

The adaptor is used to hold the buffing pad in the drill's chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.

It would be best to use a drill press to polish metals. If a drill press
is not accessable, use adaptor
TCV01810 with a portable drill with a collar
diameter of 43mm. Tighten the adaptor in the drill's chuck.

The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occuring.

If desired, heat the item to 65 C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.

Hold the metal lightly against the buffing pad. Allow the compound to do
the work.

If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.

Use Tork Craft's line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.

	HEAVY DUTY CLEANING	REGULAR CLEANING	LIGHT POLISHING	HIGH GLOSS POLISHING
Hard metals	1	2	5	6
Soft metals		3	5	6
Precious metals		4	5	6